Radiator thermoregulators RAW-K, RA 200, etc.

• The X-tra™ temperature control kit consists of a shut-off and connection valve and a thermostat valve with a thermostatic element of the right or left version.
• Connecting headsets of the VHS-R type for design radiators and heated towel rails for a two-pipe heating system. A VHS-F type distribution headset for a two-pipe heating system is installed on the return line and is a temperature limiter of the returned coolant, providing constant heat transfer from the surface of the heating device.
• The RA-N valve is designed for use in two-pipe pumping systems of water heating.

• Thermostatic elements of the RA 2000 series are automatic temperature control devices designed to complete radiator thermostats of the RA type. The radiator thermostat is a direct-acting proportional air temperature controller with a small proportionality zone, which are currently equipped with heating systems for buildings of various purposes.
• Thermostatic elements of the RAW-K type can be installed on valves with connecting thread M 30x1.5 from MNG, Heimeier and Oventrop, built into steel radiators Diatherm, Kermi, Korado, Purmo, Rettig, Radson, Demrad, Stelrad.
• The electronic radiator thermostat Living eco is a programmable microprocessor controller for maintaining a set air temperature, mainly in the premises of residential buildings serviced by a water heating system. The thermostat is designed for installation on the valves of radiator thermostats.

• Thermostatic elements of the RA 2000 series. Technical description.
• Thermostatic elements of the RAW-K type. Technical description.
• Electronic radiator thermostat living eco. Technical description.

• The RA-N valve is designed for use in two-pipe pumping systems of water heating with copper or stainless steel pipelines. Special crimping tools are required to connect the valve fitting to the pipeline.
• Valves for single-tube heating system RA have increased throughput and are intended for use in pumping single-tube water heating systems with closing sections (by-passes).

• Valve of thermoregulators RA-N. Technical description.
• The temperature control valve. Technical description.

• The headset for a two-pipe heating system is intended, as a rule, for use in horizontal heating systems with underground laying of pipelines.

• Connection-regulating headsets RA-K and RA-KW. Technical description.

• The RLV valve with the possibility of emptying for lateral connection to the radiator of pipelines of a two-pipe heating system.
• The shut-off and connecting valve RLV-K is designed for connecting horizontal single-pipe or double-pipe heating systems to the distribution pipelines of heating devices with a lower arrangement of connecting fittings with an axial distance of 50 mm.
• The shut-off and connecting valve RLV-KD is designed for connecting horizontal two-pipe heating systems to the distribution pipelines of heating devices with the lower location of the connecting fittings at an axial distance of 50 mm.
• The shut-off and connecting valve RLV-KS is designed for connecting to pipelines of two-pipe horizontal heating systems of heating devices with lower connecting fittings at their axial distance of 50 mm. The RLV-KS is not suitable for attaching a drain valve to it.

• The RLV valve. Technical description.
• Shut-off and connecting valve RLV-K. Technical description.
• Shut-off and connecting valve RLV-KD. Technical description.
• Shut-off and connecting valve RLV-KS. Technical description.

Catalog

Questionnaire